Skip to main content
Rockwall Handyman Co.

Siding Repair

We repair vinyl, fiber-cement and wood siding that has cracked, rotted, blown loose or come off in a storm. Damaged panels and boards get replaced with the closest match we can find, and a wall or gable end gets re-sided when the old siding is past saving. Trim, corner posts and J-channel go back so water runs off the wall, not behind it. Manufactured homes too, skirting included.

  • Fully insured
  • Locally owned
  • Same-week scheduling
  • 50+ jobs completed
Recent Work

Jobs we finished lately.

All projects →
The end wall of a manufactured home with the siding off the upper half, the bare sheathing water-stained, a meter box below.
Before
The same end wall after, white vinyl siding all the way up the gable.
After

Siding back on a manufactured home

The upper end wall was down to water-stained sheathing. Now it has white vinyl siding all the way up the gable.

Denton, TX

White vinyl skirting with one panel dropped out of the top rail, leaving a dark gap into the crawl space with insulation showing.
Before
The repaired wall: skirting panels seated in the top rail with no gaps along the full length of the run.
After

Skirting panel back in its track

A panel had dropped out of the top rail and left the crawl space open. Back in its track, and the run closed end to end.

Quitman, TX

What's Included

Typical siding repair work

  • Vinyl panels replaced or re-hung
  • Fiber-cement and wood boards replaced and painted
  • Storm-blown siding put back
  • A wall or gable end re-sided
  • Trim, corner posts and J-channel
  • Manufactured-home siding and skirting
Good to Know
How do I get a quote for siding repair?+

Send two photos, one of the whole wall and one close-up of the damage, and tell us the town. If you have leftover siding or know the brand and color, say so. The quote is free.

Can you match my existing siding?+

Usually close. Vinyl comes in a lot of profiles and colors, and older siding fades, so a new panel can look a shade off; on a wall that faces the street, it can make sense to move panels from a hidden wall and put the new ones there. Fiber-cement and wood boards are matched to the profile and painted to blend. We tell you before we start if it won't be exact.

What kinds of siding do you work on?+

Vinyl, fiber-cement and wood, manufactured homes included. Fiber-cement and wood boards are cut to fit, primed and painted to match, and rotted wood is cut back to sound material before anything new goes in.

Do you re-side whole houses?+

We take on repairs, sections, and single walls or gable ends. A whole-house re-side is a bigger project, and we'll tell you up front and point you to the right crew.

What if the wall behind the siding got wet?+

Siding that blew off often leaves the sheathing exposed to rain. Before new siding goes over it, we check the sheathing and trim for soft spots, so the problem isn't covered up.